Beiträge von Linvs

I too am not very about the fake engine sound, but even more I am annoyed that there is no option to turn it off. Bad Mazda! They should know by this time that customer is always right, and let us choose if we want it or not.

B.y the way, I tried driving with boot unlocked, (it's still secured mechanically, just unlocked, and there is no fake sound at all (except dash warning beeps that boot is not fully closed). It "sounds" Perfect!

Anyway, I wanted to share this video with you a bit more technical folks here. This is Honda Civic, but I would hope/assume something similar is also in MX-30? Separate unit somewhere under the dashboard that produces that's fake sound and could be just unplugged?

Oly if I knew what to look for (and how to open the dash panels)

Zitat von Doc_C

A topic here in the forum (not in this thread) were the error messages during the loading process that the app reports in between that loading has ended or has been canceled. In fact, the car continues to charge. I also get this error message in the app. Interestingly, contrary to the message in the app, the car just continues to charge, as I can see on the LEDs of the JuiceBooster and even if I look at the energy meter of my PV system, a large amount of electricity is still drawn (3-4 kW), although none other "bulk consumers" are on (WaMa, dryer, etc.). At the same time, the charging lamp next to the socket in the car (which normally flashes slowly green) no longer lights up (not at all, i.e. no other color that would indicate an error).

Has anyone seen this before? Could it be that the app or the vehicle incorrectly interprets a reduction in charging power, as it seems to be normal towards the end of a charging process with over 80% charge, as "charging aborted"?

many Greetings

S.

Alles anzeigen

Hi, I've experienced this multiple times now, when I charge above 80%, I always get a notification about charge completed at 87%
when I remotely start another charge, it appears to be charging (or it probably was anyway) and I get another "charge has completed" message 1-5 minutes later...
problem is, the app is extremely rubbish at refreshing and providing info, so I can get it to refresh only after 3-4 attempts, only then I can see that my charge level jumped 1-3% up
I am charging at 20A from wallbox, (4.6kWh charge rate), but the same happened to me when I tried public charger (mennekes at 5.1kwh at that moment) - also at 87%. To make things worse, I was unable to use rapid charger (50 kW one) today when battery was at 94%, charging station displayed an error cause by mx-30 (not specified) - I tried maybe 4 times, I was still able to charge using type 2.

when this happened for the first time, my scheduled charging started at midnight with 100% target, stopped around 3am

in the morning, the display was still showing 87% so even if the charge continued as you mentioned, the display never showed the correct information for me (or in my case it really didn't continued and actually stopped charging)

I have another charge scheduled for tonite, I will see if this repeats

All the best
L